Challenge 2

Challenge 2
___________

You must configure R1 to leverage the two Content Engines. R1 must ensure that it can only communicate with 192.168.0.100 and 192.168.0.101 content engines. Hosts on 10.0.2.0/24 should not use the content engines and should be able to surf the internet without being redirected. Hosts on 10.0.1.0/24 should be redirected to the content engines. The configuration should only be completed on R1. Note: You must use the latest version of the technology and it must support authentication.

R1
__


interface FastEthernet0/0
 ip address 10.0.0.1 255.255.255.0
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip address 192.168.0.1 255.255.255.0
 duplex auto
 speed auto
 no keepalive
!
interface Serial1/0
 ip address 200.0.0.1 255.255.255.0
 serial restart-delay 0
!
router ospf 1
 router-id 1.1.1.1
 log-adjacency-changes
 redistribute static metric 5 subnets
 network 10.0.0.1 0.0.0.0 area 0
 network 192.168.0.1 0.0.0.0 area 0
 network 200.0.0.1 0.0.0.0 area 0
!
ip route 0.0.0.0 0.0.0.0 200.0.0.2


R2
__

interface FastEthernet0/0
 ip address 10.0.0.2 255.255.255.0
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip address 10.0.1.1 255.255.255.0
 duplex auto
 speed auto
 no keepalive
!
interface FastEthernet1/0
 no switchport
 ip address 10.0.2.1 255.255.255.0
 no keepalive
!
router ospf 1
 router-id 2.2.2.2
 log-adjacency-changes
 network 10.0.0.2 0.0.0.0 area 0
 network 10.0.1.1 0.0.0.0 area 0
 network 10.0.2.1 0.0.0.0 area 0



R3
__ -- Acting as the hext hop to the internet

interface Serial1/0
 ip address 200.0.0.2 255.255.255.0
 serial restart-delay 0

!
ip route 10.0.0.0 255.255.255.0 200.0.0.1
ip route 10.0.1.0 255.255.255.0 200.0.0.1
ip route 10.0.2.0 255.255.255.0 200.0.0.1
ip route 192.168.0.0 255.255.255.0 200.0.0.1




Good Luck!

Question 157

How would you ensure when using telnet that it always uses fastethernet 0/1 as the source interface without using "telnet 1.1.1.1  /source-interface fastethernet 0/1"

Question 101

What is an industry standard first hop redundancy protocol?

Question 100

How many groups can be created in HSRP v1 and HSRP v2?

Question 99

When using HSRP how would you ensure that communications between routers are sent using 224.0.0.102?

Question 98

What is AVG and where is it used?

Question 41

What is RMON and why would you use it?

Question 40

What protocol would you use to send traps that are authenticated and encrypted?

Provide an example.

Question 39

What is SNMP and its major differences between versions?

Provide an example and restrict it to host 192.168.1.10.