Prefix lists can be used to match a complete address class
Class A = 1.0.0.0 – 126.255.255.255
Class B = 128.0.0.0 – 191.255.255.255
Class C = 192.0.0.0 – 223.255.255.255
The classes can be defined by the starting bits in the first octet
Class A = 0
Class B = 10
Class C = 110
In order to match Class A, B, or C you need to perform the following:
Class A
1.0.0.0/1 le 32 (must match the first bit and the subnet can be less then or equal to 32)
Class B
128.0.0.0/2 le 32 (must match the first two bits and the subnet can be less then or equal to 32)
Class C
192.0.0.0/3 le 32 (must match the first three bits and the subnet can be less then or equal to 32)
Class A = ip prefix-list CLASSA permit 1.0.0.0/1 le 32
Class B = ip prefix-list CLASSB permit 128.0.0.0/2 le 32
Class C = ip prefix-list CLASSAC permit 192.0.0.0/3 le 32
Note: 127.0.0.0 - 127.255.255.255 is reserved for loopbacks.
Looking to boost productivity on Windows 11? In this video, we dive deep
into how you can supercharge your workflow using the powerful File Explorer
Tabs...
1 week ago
3 comments:
nice stuff just help me clear my doubt
CLASS A: 0.0.0.0/1 le 32 is better.
Provide more insight and an example of when you have seen a Class A address used between 0.0.0.0 - 0.255.255.255 - I am not suggesting that you could not use "0.0.0.0/1 le 32" but this will include a default route.
Post a Comment